The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat The Burning Question - Stoves - Euroheat

Euroheat Fabbri Industrial Space Heaters

The Euroheat range of Fabbri wood burning workshop heaters have heat outputs from 29 to 410 kW. The range is suitable for burning all types of dry wood and secondary waste wood. The fuel chambers are constructed of high grade stainless steel for long life, no fire bricks to change. The fuel is loaded through an upper separate large fuelling door while the ash is removed through a lower access door.

Euroheat Fabbri F28 Stove

F28

The horizontal stainless steel combustion chamber has purpose designed reinforcing ribs for extended life. The frame is constructed from painted profile steel, with zinc plated outer side panels. The Loading door and ash removal door are both refractory lined steel. The gate system has steel cross members enabling easy maintenance.

The air side centrifugal fan is low speed with anti-vibration mountings designed to reduce noise. Fan automatically operates on temperature. Fitted as standard with top rotational directional vent tubes. Hot air ducts can be added to transfer heat to multiple locations.

For use with natural draught chimneys. Chimney requires suitable height for the appliance to operate, normally a minimum of 5 metres and terminate out of any potential down draught zone.

- Low purchasing cost, installation cost, running cost and maintenance
- CO2 friendly, Highly efficient, Simple to use, Long life

MAX OUTPUT - 25,000 Kcal/h, (29kW)

Euroheat Fabbri F55 Stove

F55

Ideal for heating large workshop and factory spaces with wood logs and secondary wood waste. The horizontal stainless steel combustion chamber has purpose designed reinforcing ribs for extended life. The frame is constructed from painted profile steel, with zinc plated outer side panels. The loading door and ash removal door are both refractory lined steel. The gate system has steel crossmembers enabling easy maintenance.

The air side centrifugal fan is low speed with anti-vibration mountings designed to reduce noise. Fan automatically operates on temperture. Fitted as standard with top rotational directional vent tubes. Hot air ducts can be added to transfer heat to multiple locations.

For use with natural draught chimneys. Chimney requires suitable height for the appliance to operate, normally a minimum of 5 metres and terminate out of any potential down draught zone.

- Low purchasing cost, installation cost, running cost and maintenance
- CO2 friendly, Highly efficient, Simple to use, Long life

MAX OUTPUT - 55,000 Kcal/h, (64kW)

Euroheat Fabbri F85 Stove

F85

Fabbri Model F85SV purpose designed workshop and factory space heater for natural draught chimney operation. Ideal for heating large workshop and factory spaces with wood logs and secondary wood waste.

The horizontal stainless steel combustion chamber has purpose designed reinforcing ribs for extended life. The frame is constructed from painted profile steel, with zinc plated outer side panels. The loading door and ash removal door are both refractory lined steel. The gate system has steel crossmembers enabling easy maintenance.

The air side centrifugal fan is low speed with anti-vibration mountings designed to reduce noise. Fan automatically operates on temperture. Fitted as standard with top rotational directional vent tubes. Hot air ducts can be added to transfer heat to multiple locations.

For use with natural draught chimneys. Chimney requires suitable height for the appliance to operate, normally a minimum of 5 metres and terminate out of any potential down draught zone.

- Low purchasing cost, installation cost, running cost and maintenance
- CO2 friendly, Highly efficient, Simple to use, Long life

MAX OUTPUT - 80,000 Kcal/h, (93kW)

Euroheat Fabbri F120 Stove

F120

Ideal for heating large workshop and factory spaces with wood logs and secondary wood waste.

The horizontal stainless steel combustion chamber has purpose designed reinforcing ribs for extended life. The frame is constructed from painted profile steel, with zinc plated outer side panels. The loading door and ash removal door are both refractory lined steel. The gate system has steel crossmembers enabling easy maintenance.

The air side centrifugal fan is low speed with anti-vibration mountings designed to reduce noise. Fan automatically operates on temperture. Fitted as standard with top rotational directional vent tubes. Hot air ducts can be added to transfer heat to multiple locations.

For use with natural draught chimneys. Chimney requires suitable height for the appliance to operate, normally a minimum of 5 metres and terminate out of any potential down draught zone.

- Low purchasing cost, installation cost, running cost and maintenance
- CO2 friendly, Highly efficient, Simple to use, Long life

MAX OUTPUT - 120,000 Kcal/h, (140kW)

Euroheat Fabbri F240 Stove

F240

Ideal for heating large workshop and factory spaces with wood logs and secondary wood waste.

The horizontal stainless steel combustion chamber has purpose designed reinforcing ribs for extended life. The frame is constructed from painted profile steel, with zinc plated outer side panels. The loading door and ash removal door are both refractory lined steel. The gate system has steel cross members enabling easy maintenance.

The air side centrifugal fan is low speed with anti-vibration mountings designed to reduce noise. Fan automatically operates on temperture. Fitted as standard with top rotational directional vent tubes. Hot air ducts can be added to transfer heat to multiple locations.

For use with natural draught chimneys. Chimney requires suitable height for the appliance to operate, normally a minimum of 5 metres and terminate out of any potential down draught zone.

- Low purchasing cost, installation cost, running cost and maintenance
- CO2 friendly, Highly efficient, Simple to use, Long life

MAX OUTPUT - 240,000 Kcal/h, (279kW)

Euroheat Fabbri F350 Stove

F350

Ideal for heating large workshop and factory spaces with wood logs and secondary wood waste.

The horizontal stainless steel combustion chamber has purpose designed reinforcing ribs for extended life. The frame is constructed from painted profile steel, with zinc plated outer side panels. The loading door and ash removal door are both refractory lined steel. The gate system has steel cross members enabling easy maintenance.

The air side centrifugal fan is low speed with anti-vibration mountings designed to reduce noise. Fan automatically operates on temperture. Fitted as standard with top rotational directional vent tubes. Hot air ducts can be added to transfer heat to multiple locations.

For use with natural draught chimneys. Chimney requires suitable height for the appliance to operate, normally a minimum of 5 metres and terminate out of any potential down draught zone.

- Low purchasing cost, installation cost, running cost and maintenance
- CO2 friendly, Highly efficient, Simple to use, Long life

MAX OUTPUT - 350,000 Kcal/h, (407kW)